Blog

GS38-compliant ATUTEN UT15C two-pole voltage tester with shrouded fused probes

GS38 Voltage Tester: What UK Apprentices Need for Safe Isolation

What makes a tester GS38 compliant — probe tips, fused leads and the checks assessors expect — and how apprentices stay on budget without premium prices.

ATUTEN UK2026-07-20

Gas engineer proving a two-pole voltage tester on a proving unit before boiler work

Voltage Tester with Proving Unit: The Kit Multi-Trade Engineers Need

What GS38 expects from a proving-dead kit, why a multimeter fails the job, and what a compliant setup costs for gas engineers, plumbers and kitchen fitters.

ATUTEN UK2026-07-20

Non-contact voltage pen next to a two-pole voltage tester on a UK workbench

Non-Contact vs Two-Pole Voltage Tester: Which Should Homeowners Trust?

Why a beeping pen is not proof a socket is dead, what a two-pole tester does differently, and which tool to trust before you touch any wiring at home.

ATUTEN UK2026-07-20

Electrician checking phase sequence on a UK three-phase distribution board

Phase Rotation Tester UK Guide: Checking Sequence on Your First Three-Phase Job

How sequence checks stop reversed motors on commercial jobs, and why one rotation-capable two-pole tester covers both safe isolation and sequence.

ATUTEN UK2026-07-20

Insulation resistance tester set to 500V DC beside a UK consumer unit

Megger Tester Voltage: Which Range to Use and When

When to test at 250V, 500V or 1000V DC under BS 7671 Table 64, the two-stage test with equipment connected, and why a megger never proves dead.

ATUTEN UK2026-07-20